Injection Molding Machine FAQ

Start with the product drawing or sample, resin, part weight, wall thickness, mold size, cavity count and output target. Check clamping force, shot capacity, injection pressure, screw diameter, tie-bar spacing, platen size, opening stroke and ejector requirements together.

Send the product and mold information, resin, number of cavities, target cycle or output, local voltage, destination port and required auxiliary equipment. If no mold is available yet, product drawings and planned capacity are enough for an initial review.

A servo-hydraulic machine uses a servo motor to control hydraulic pump output according to cycle demand. This can improve response and reduce unnecessary energy use compared with a constant-speed pump system. Actual savings depend on the product, mold, process and production cycle.

Clamping force is estimated from the projected area of the part and runner, cavity count, material and expected cavity pressure. The selected machine also needs enough mold space, opening stroke and shot capacity.

Shot capacity describes the volume the injection unit can deliver. Published shot weight is normally based on a reference resin and changes with material density. Total part and runner volume should be checked against usable injection capacity with a suitable process margin.

Machine configuration can be evaluated for PP, PE, PS, ABS, PET, PA, PC, PBT and selected filled or flame-retardant compounds. PVC and other heat-sensitive or corrosive materials require application-specific screw, barrel and process review.

Yes, when every mold is compatible with the machine’s clamping force, injection capacity, platen dimensions, tie-bar spacing, opening stroke, ejector travel and interfaces.

The solution can include matched auxiliaries such as loaders, dryers, chillers, mold temperature controllers, mixers, crushers, robots and conveyors.

Electrical configuration should be confirmed against the installation site’s voltage, frequency and applicable requirements before order confirmation.

Testing, parameter guidance, installation checks and operator support can be planned according to the machine, mold readiness, destination and agreed project scope.

Lead time and warranty terms depend on the final configuration, production schedule, destination and sales contract. Confirm the current terms in the formal quotation rather than relying on a generic estimate.

Send the application details through the quotation form or email threeplast02@threeplast-machinery.com. The more complete the part, mold and output information, the more accurate the initial recommendation can be.